Flat Flexible Copper Rubber Cable

Flat Flexible Copper Rubber Cable

Available in stock: yes

Model: NYY 

Rate: 5.00 of 5

Size: Choose an option

Pre order

Price:

Appearance specifications:

This product is a type of stranded cable, used in the construction of submersible pumps that are used for water supply. Due to their characteristics, these cables are the most suitable type of cable for use in water environments to ensure the health of the cable and drinking water in this environment. 

• Resistance of cable jacket to ultraviolet rays and ozone gas
• Insulation resistance to sharp objects such as well wall wastes
• Insulation and coating with high mechanical strength
• It has very good electrical properties
• High heat transfer capability and very high thermal resistance
• Non-release of toxic substances, heavy metals and organic chemicals from the walls and polymer coating into drinking water
• Resistance to contact with chemicals, petroleum products, organic solvents
• Resistance to acidic and alkaline environments
• Has elasticity even at low temperatures
• Ability to recycle waste and reuse it

Technical specifications:

The conductor used in this type of cable is made of annealed copper grade 5 and the cover that is placed as insulation on this conductor is a kind of waterproof tape that does not absorb moisture. The cover and general insulation is made of PVC polymer. The nominal voltage of these cables is 0.6 / 1KV. The cross section of the cables is generally 3 x 16 (square mm) and they are offered in lengths of 1 meter with a weight of about 1.01 kg / km.

Structure:

Conductor: twisted annealed copper filaments with flexibility (group 5) according to ASTM B49.

Insulation: PVC type A.

Jacket: ST8 

Application:

Used in construction wiring and one of the most important used in construction and industrial facilities. Due to their softness and flexibility, they should be used at relatively short intervals.

Used for festoon systems (e.g. on gantry cranes, container cranes etc.), handling systems, machine tools, lifts and e-chain cable carrier systems. For applications with high mechanical stresses and frequent bending in one plane only.