Flat Flexible Copper Conductor Cables

Flat Flexible Copper Conductor Cables

Available in stock: yes

Model: NYMHY-FLAT    450/750 V 

Rate: 5.00 of 5

Size: Choose an option

Pre order

Price:

This product is a wide flat cable that can communicate between the elevator control panel and the cab. It is lightweight, high current transmission, electrical stability, high strength and flexibility.

95% of manufactured wires and cables are installed in a fixed location; But the remaining 5% need cables that can be used in elevators and cranes.

This cable can perform well for up to 20 years or 3 million times of flexible movement. One of the most important advantages of this product is being compact, so that several cables can be easily stacked on top of each other and do not take up much space.

One of the technical advantages of flat cables over round cables is that flat cables distribute the mechanical load over the entire cross section of the cable, thus reducing heat dissipation and reducing the need for large conductors. flat cables don’t require additional insulation materials, fillers. Because the conductor distance and geometry of the cable are constant, electrical properties such as capacitance, time delay, and attenuation remain constant.

Appearance specifications:

The Flat Flexible Copper Conductor Cables used in today’s elevators is different from the old models, and the Flat Flexible Copper Conductor Cables today usually has more than 12 strands, and most of them have 20 to 24 strands. An example of a medium height Flat Flexible Copper Conductor Cable has 14 AWG (1.5 mm2) of fixed current conductor, 18 AWG (0.75 mm2) of signal conductor and 20 AWG (0.5 mm2) for data transmission.

The Flat Flexible Copper Conductor Cable is available in three short heights (up to 80 meters and suspended length up to 45 meters), medium (up to 150 meters and suspended length up to 85 meters) and high-rise (up to 400 meters and suspended length of 220 meters). The nominal voltage of Flat Flexible Copper Conductor Cables in normal dimensions is 750/450 volts and the temperature range is -5 degrees to +70 degrees Celsius.

Technical specifications:

The insulation material is made of solid or foamed polyethylene (PVC coating) and its conductor wire is made of annealed or uncoated copper. Flat Flexible Copper Conductor Cable is produced in various sizes, the usual dimensions of which are 0.5 * 2, 0.75 * 2, 1.5 * 4, 2.5 * 4, 4 * 4, 6 * 4, 10 * 4, 16 * 4, 1.5 * 8, 2.5 * 8, 1.5 * 12, 2.5 * 12, 1.5 * 16, 0.75 * 24, 1.5 * 20, 1.5 * 30 and 1.5 * 60

Structure:

Conductor: twisted annealed copper filaments with flexibility (group 5) according to ASTM B49 standard.

  Standard: ASTM B49, VDE 0207-5, IEC 60227-6                                                                                             Model: NYMHY-FLAT 450/750 V     

    Insulation: PVC/D 

 Nominal voltage :450/750 V

  Jacket: ST5 PVC        

Application:

In domestic premises, offices, for household appliances for medium duties and It is used in conveyor systems, lifting equipment, bending machines, elevators and deep well submersible pumps.